System Error 53 on Windows, how to fix this?

By | March 23, 2023

System Error 53 is a common error that occurs in Windows when trying to access a shared network resource such as a printer, file share, or network drive. This error occurs when the network path specified in the command is not found, indicating that the system is unable to communicate with the remote server. Here’s what you need to know about System Error 53 and how to fix it.

Causes of System Error 53:

  1. Incorrect network path
  2. Firewall blocking the connection
  3. Network connectivity issues
  4. DNS name resolution issues
  5. Remote server not available or offline
  6. Credentials not valid

System Error 53 on Windows, how to fix this?

System Error 53 is a common error message that appears on Windows computers when trying to access a shared folder, network drive, or printer that is not available or cannot be found on the network. Here are some steps you can take to fix this issue:

  1. Check the network path – Make sure you have the correct network path for the resource you are trying to access. Verify the spelling of the path and that it is accessible on the network.
  2. Check the network connection – Check the status of your network connection to ensure that it is active and properly configured. You can do this by checking your network settings in the Control Panel or using the ipconfig command in the command prompt.
  3. Check the server – Ensure that the server hosting the resource is running and available on the network. You can test this by pinging the server using the ping command in the command prompt.
  4. Check the firewall – Make sure that any firewalls on the network or on your computer are not blocking access to the resource. You can temporarily disable the firewall to test if it is the cause of the error.
  5. Map the network drive – If you are trying to access a network share, you can map the drive to make it easier to access in the future. To do this, right-click on “Computer” or “This PC” in Windows Explorer and select “Map network drive.”
  6. Reset the network stack – If none of the above solutions worked, you can try resetting the network stack using the “netsh int ip reset” command in the command prompt. This will reset your TCP/IP settings and may help resolve the issue.
  7. Enable NetBIOS over TCP/IP – NetBIOS is an older protocol used for file and printer sharing on Windows networks. Enabling NetBIOS over TCP/IP may help resolve the System Error 53 issue. To do this, open the Control Panel and select “Network and Sharing Center.” Click on “Change adapter settings,” then right-click on your network connection and select “Properties.” Select “Internet Protocol Version 4 (TCP/IPv4)” and click “Properties.” Click on “Advanced,” then select the “WINS” tab. Check the box next to “Enable NetBIOS over TCP/IP” and click OK.

By following these steps, you should be able to resolve the System Error 53 issue and gain access to the network resource you need.

Leave a Reply

Your email address will not be published. Required fields are marked *